Mars Odyssey orbiter reboots successfully
The procedure also restored Odyssey's onboard set of backup systems.
March 12, 2009
Provided by the Jet Propulsion Laboratory, Pasadena, California
March 12, 2009
Photo by NASA/JPL
NASA's Mars Odyssey orbiter properly followed commands March 11 to shut down and restart, a strategy by its engineers to clear any memory flaws accumulated in more than 5 years since Odyssey's last reboot.
The procedure also restored Odyssey's onboard set of backup systems, called the spacecraft's "B side," allowing its use in the future when necessary.
"For nearly two years, we have not known for certain whether the backup systems would be usable," said Odyssey Project Manager Philip Varghese of NASA's Jet Propulsion Laboratory, Pasadena, California, "so this successful reboot has allowed us to ascertain their health and availability for future use.
Odyssey has been orbiting Mars since 2001 and has never switched from its primary set of components, the "A side," to the backup set, which includes an identical computer processor, navigation sensors, relay radio, and other components. In March 2006, the B-side spare of a component for managing the distribution of power became inoperable. Analysis by engineers identified a possibility that rebooting Odyssey might restore that component, which proved to be a side benefit of yesterday's procedure to refresh onboard memory.
The Odyssey team began a series of steps after the reboot to carefully return the spacecraft to full functioning over the next few days. Following that path, the science instruments will be back to studying Mars by next week.
An unexpected rise in temperature of the star camera in Odyssey's navigation system March 9 prompted a postponement of the rebooting originally scheduled for the next day. Engineers identified the cause as a heater circuit that was temporarily stuck "on." The circuit was turned off before the reboot.